THERMOFORMING DESIGN GUIDE

What You Need to Know to Make the Right Decision…

This design guide is provided for mechanical engineers and designers and for others who have a need to understand the technical specifications for thermoforming, vacuum forming, and pressure forming. These processes are all considered thermoforming processes.

Within this guide you will find information about dimensional tolerances, draw ratios, undercuts, plug assists and radii and chamfers, as well as other information regarding the technical side of thermoforming processes. We are certain that you will find this information useful in designing parts that you want to have produced through thermoforming.

 

By filling out the information to the right you will receive our “Thermoforming Design Guide”.  Thank you.

 

By filling out the information to the right you will receive our “Introduction to Vacuum Forming and Thermoforming Guide.   You will be the first to received our revised Design Guide when it is published,  Thank you.



  • Should be Empty:



Comments are closed.